Table of Contents
Advertisement
NORMAL PLAYBACK
POWER
1
2
3
TV/VCR
4
5
6
Ad JUMP
7
8
9
SLOW
INPUT
SP/SLP
0
EJECT
REC
PAUSE
REW
FF
PLAY
STOP
ENTER
MENU
CLK/COUNT
CH
TRACK
CLEAR
VOL
VOL
TV CH
TV CH
TV POWER
TV INPUT
22
PREPARATION
• Turn on the TV.
• Be sure the TV is set to the VCR Output Channel (CH 3 or 4).
• If a direct VIDEO/AUDIO connection is made between the
VCR and the TV, set the TV's source selector to VIDEO.
NORMAL PLAYBACK
1
Insert a prerecorded video cassette.
The TAPE IN indicator will light and the VCR will power-up
automatically.
• Make sure that the TIMER indicator in the VCR indicator panel
is not lighted. If it is, press POWER once.
• If a tape without a safety tab is inserted the unit will start the
playback automatically.
2
Press PLAY once.
The PLAY appears on the TV screen .
• It is not necessary to select the tape speed for playback. It will
be automatically selected by the VCR.
• In playback, the TV/VCR selector switches to VCR mode auto-
matically.
3
Press STOP to stop playback.
The STOP appears on the TV screen.
• If the tape reaches the end before STOP is pressed, the VCR
will automatically stop, rewind, eject, and it will turn itself off.
TRACKING CONTROL
AUTO TRACKING
The automatic tracking function adjusts the picture to remove
snow or streaks.
The AUTO TRACKING function works in the following cases:
• A tape is played back for the first time.
• Tape speed (SP, LP, SLP) changes.
• Streaks or snow appear because of scratches on the tape.
MANUAL TRACKING
If noise appears on the screen during playback, press either
D D
E E
CH/TRACK (
/
) on the remote control or CHANNEL (
the front panel until the noise on the screen is reduced.
• In case of vertical jitter, adjust these controls very carefully.
• Tracking is automatically reset to normal when the tape is
ejected or the power cord is unplugged for more than 3
seconds.
D D
E E
/
) on
Advertisement
Table of Contents
