Table of Contents
Advertisement
CHANNEL SELECTION (Cont'd)
MAIN MENU
CLOCK
PROGRAM
TUNING
SETUP
SELECT
ENTER
TO EXIT PRESS
TUNING MENU
AUTO CHANNEL SET
TUNING BAND:
TV
CH. ADD/DEL: CH. 2
ADD
SOURCE SELECT:
TUNER
ADD/DELETE
SELECT
ADJUST
TO EXIT PRESS
VIEWING TV ONLY
Switch on the TV and set it to the
channel that you wish to watch.
POWER
STOP/
EJECT
CHANNEL
Set POWER to OFF.
18
TO ADD OR ERASE CHANNELS FROM MEMORY
This feature allows you to add or erase channels from memory
manually.
1
Press MENU and the MAIN menu will appear.
2
Press
D D
or
E E
ENTER. The TUNING menu will appear.
3
E E
Press
to choose the CH. ADD/DEL item. Press
select a channel to add or erase.
4
Press ENTER to add or erase the channel.
Repeat steps 3 and 4 to add or erase channels.
5
Press MENU to return to the TV screen.
You don't need to disconnect the VCR from the TV to watch TV
separately. When the VCR's power is OFF, or when the VCR's
power is ON and the TV/VCR selector is set to TV, the TV will
operate as if it were connected directly to the antenna or cable.
NOTES
• The power cord must be plugged into an AC outlet.
• To view or record cable TV programs with the VCR, the VCR's
TUNING BAND item must be set to CATV (TUNING menu).
• Do not place the VCR directly on top of the TV. This may
P
cause interference in the picture and sound (of the VCR) dur-
ing the recording or playback mode. If this interference
occurs, locate the VCR away from the TV.
to select the TUNING menu, then press
F F
G G
or
to
Advertisement
Table of Contents
