Channel Selection - Sanyo VHR-M341 Instruction Manual

CHANNEL SELECTION

PAUSE
REW FF
PLAY
STOP
ENTER
MENU
CLK/COUNT
CH
TRACK
CLEAR
VOL VOL TV CH TV CH
TV POWER TV INPUT
CLOCK
PROGRAM
TUNING
SETUP
SELECT ENTER
TO EXIT PRESS
AUTO CHANNEL SET
TUNING BAND: TV
CH. ADD/DEL: CH. 2 ADD
SOURCE SELECT: TUNER
SELECT ADJUST
TO EXIT PRESS
AUTO CHANNEL SET
TUNING BAND: TV
CH. ADD/DEL: CH. 2 ADD
SOURCE SELECT: TUNER
SELECT ADJUST
TO EXIT PRESS
AUTO CHANNEL SET
TUNING BAND: TV
CH. ADD/DEL: CH. 2 ADD
SOURCE SELECT: TUNER
SELECT ADJUST
TO EXIT PRESS
AUTO CHANNEL SET
PROCEEDING
CHANNEL 13
TO EXIT PRESS
AUTO CHANNEL SET
TUNING BAND: TV
CH. ADD/DEL: CH. 2 ADD
SOURCE SELECT: TUNER
SELECT ADJUST
TO EXIT PRESS
This VCR is equipped with a frequency synthesized tuner capa-
ble of receiving up to 181 channels. These include VHF chan-
nels 2-13, UHF channels 14-69 and CATV channels 1-125.
PREPARATION
• Connect the VCR to the desired type of antenna or cable TV
system, as shown in ANTENNA TO VCR CONNECTIONS and
CABLE ANTENNA (CATV) CONNECTION (pages 7-9).
• Switch on the power to the VCR and TV.
• Set the TV to the match the VCR output channel (CH 3 or 4).
AUTO CHANNEL PROGRAMMING
1
Press MENU and the MAIN menu will appear.
2
Press D D or E E to select the TUNING menu, then press
ENTER. The TUNING menu will appear.
3
Press E E to choose the SOURCE SELECT item, then press
F F or G G to select TUNER.
F F G G
Press or repeatedly to switch between TUNER and LINE.
4
Press D D or E E to choose the AUTO CHANNEL SET item,
then press F F or G G to set the channel.
The tuner will automatically cycle through all available channels
in the area and place them in the tuner's memory.
5
After the AUTO CHANNEL SET PROCEEDING is complete,
make sure the TUNING BAND is set appropriately (TV or
CATV) by pressing D D
BAND (TV or CATV) by pressing
menu.
• Remember, TV is for the air antenna reception, CATV is for
cable or wireless cable connection.
6
Press MENU to return to the TV screen.
Use CH/TRACK ( / ) or CHANNEL ( / ) on the front panel
to cycle the VCR through the channels in memory.
or E E and choosing the correct TUNING
F F or G G using the TUNING
17