DUBBING AND EDITING
If you wish to edit or dub your camcorder (or another VCR) recordings to this VCR, the rear
(or Front) panel mounted Audio and Video (A/V) input jacks make the connections quick and
easy. The direct A/V jacks will also provide better picture results than using the RF jack on the
rear panel.
Another VCR: Play
From
AUDIO and
VIDEO Output
1
Connect the camcorder's (or another VCR's) A/V outputs to your VCR as illustrated above.
2
Set the input channel "LINE2". (Press INPUT to select LINE2.)
• If you have connected your VCR to the A/V input jacks on the rear of VCR, you should
select the input channel LINE1 by pressing INPUT twice.
3
Play the tape in the camcorder (or another VCR). If you have a TV attached to your VCR,
you can see the video playing.
4
When you desire recording to begin, press VCR's REC once to start.
NOTE
Before recording, please confirm the recording start position.
Camcorder:
Play
From
AUDIO and
VIDEO Output
OR
Your VCR: Recording
LINE2
To AUDIO/VIDEO Input
POWER
STOP/
EJECT
VIDEO
L - AUDIO - R
35