Table of Contents
Advertisement
ANTENNA TO VCR CONNECTIONS
UHF Antenna
VHF Antenna
300 ohm
Twin-Lead
Cable
VHF/UHF mixer
(Not supplied)
1
Disconnect the antenna leads from the rear of the TV receiver.
2
Identify the type of cable from your antenna. If it is a round cable as illustrated, it is a
75 ohm coaxial antenna cable. This cable will connect directly to the connector marked
ANT.IN on your VCR.
If your antenna lead wire is a flat type antenna cable, connect it to a Antenna Adaptor
(300-ohm to 75-ohm) (not supplied) and slip the Adaptor onto the ANT.IN connector. The
Adaptor does not screw on to the VCR, it just slips over the connector.
VHF/UHF Antenna
75 ohm
Coaxial
Cable
OR
ANT.IN
AUDIO
VHF/UHF
IN
OUT
/CATV
3
4
VIDEO
CH.
VCR's Back Panel
VHF/UHF Antenna
75 ohm
Coaxial
Cable
300/75 ohm
Adaptor
(Not supplied)
OR
300 ohm
twin lead
7
Advertisement
Table of Contents
