Table of Contents
Advertisement
5
ADVANCED OPERATION
EDITING
7+
INPUT
REC
PAUSEI
STILL
STOP
SPILP
w
A-OUB
AUOIO
External input mode selection
"L1''0r''L2''i
sd isplayed
instead of the programme
position number.
AUDIOArlDEO IN (Rear):select"L1'
AV INPUT (Front): select "L2"
Notes on audio dubbing
If you are using a tape with a
monaural only original sound
recording, the audio dubbing will
erase the original sound, Audio
dubbing is only possible on a
tape with Hi-Fi original sound.
After an audio dubbing, to listen
tothe Hi-Fi sound, press the
AUDIObutton to display the "L'
and "R" indicators on the VCR
display.
To listen to the dubbed sound,
press the AUDIObutton to erase
the "L"and "R" indicators from
the VCR display.
VCR display
Mode
Display
'tand-by
'm
21
Tape copy
Audio dubbing
Copying (dubbing) a tape can be done using
two video recorders, a playback VCR and a
recording VCR.
Recording VCR
I Playback
VCR (Camcorder)
I
Camcorder
VCR
Recording VCR
Insert a video cassette with
erasure-prevention
tab.
Press the INPUT button to select the
terminal used (external input mode).
To select the tape speed, press the
SPILP button.
Playback
VCR (Camcorder)
-
Insert the recorded
video cassette.
3
Start playback.
Recording
VCR
4
5
When the desired starting position is
reached, press the REC button to record.
When finished, press the STOP button on
the RECORDING VCR then on the
PLAYBACK
VCR.
CAUTION:
The unauthorized
recording of television
programmed,
video tapes, films and other
such material may infringe upon copyright or
the rights of third parties
Using this function, you can add a voice over
or background
music to the image recorded
on a tape.
To perform an audio dubbing on a tape
recorded with a camcorder, you will have to
first make a Hi-Fi copy of the camcorder tape
to a VHS format video cassette using this
VCR.
You can then add a voice over or background
music to the copy you have made.
=
-L
I Audio
aource
I
Camcorder
Stereo
audio
system
-
Insert a video cassette
tape with
erasure-prevention
tab.
Make sure the recorded sound (original
sound) is Hi-Fi.
1
2
3
4
5
6
7
Press the INPUT button to select the
terminal used (external input mode).
Playback
the tape to select the audio
dubbing start point.
Press the PAUSE/STILL
button at the
audio dubbing start point.
Press the A-DUB button.
The VCR goes into audio dubbing
stand-by mode. The "L and "R"
indicators will go off. If monitoring the
external sound, the sound will be
heard.
Start playback of the audio source.
Press the A-DUB button again to start the
audio dubbing.
When finished, press the STOP button.
Advertisement
Table of Contents
