Adjusting The Position Of The Media Sensor - SATO CL4NX Plus Operator's Manual

Adjusting the Position of the Media Sensor

When you use nonstandard media (for example, media with printing on the underside, or media with
a special shape), the media sensor cannot detect the I-mark or gap of the media correctly. In such a
case, adjust the position of the media sensor to detect the I-mark or gap correctly.
• Adjust the media sensor guide to the position where it can detect the I-mark or gap of the
media.
•
The I-mark sensor (reflective type) is below the
type) is below the mark.
167
mark, and the Gap sensor (transmissive