Cleaning
Cleaning under the Mower
Service Interval: Before each use or daily
1.
Disengage the blade-control switch (PTO), move
the motion-control levers to the N
position, and engage the parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Raise the mower to the transport position.
Cleaning the Suspension
System
Note:
Do not clean the shock assemblies with
pressurized water
(Figure
Figure 104
Disposing of Waste
Engine oil, batteries, hydraulic fluid, and engine
coolant are pollutants to the environment. Dispose of
these according to your state and local regulations.
-
EUTRAL
LOCK
104).
g030538
71