Servicing The Engine Oil - Toro 75967 Operator's Manual

Servicing the Engine Oil

Oil Type: Detergent oil (API service SG, SH, SJ, or
higher)
Oil Capacity: with a filter change, 1.9 L (64 fl oz);
with no filter change, 1.7 L (57 fl oz)
Viscosity: See the table below.
Figure 49
Note:
Using multi-grade oils (5W-20, 10W-30, or
10W-40) will increase oil consumption. Check the oil
level more frequently when using them.
Checking the Engine-Oil Level
Service Interval: Before each use or daily
Note:
Check the oil when the engine is cold.
WARNING
Contact with hot surfaces may cause personal
injury.
Keep your hands, feet, face, clothing, and
other body parts away from the muffler and
other hot surfaces.
Important:
Do not overfill the crankcase with oil
because that could damage engine. Do not run
engine with oil below the Low mark because the
engine may be damaged.
1. Disengage the blade-control switch (PTO), move
the motion-control levers to the N
position, and set the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position
-
EUTRAL
(Figure 50).
g037096
LOCK
42
Figure 50
g029644
g194611