6.4.2
Light switch
6.4.3
Menu buttons
6.4.4
Turn signal switch
6.4.5
Horn button
1
Light switch
Possible states
Low beam on – Light switch in position
position, the low beam and the tail light are switched
on.
High beam on – Push the light switch to position
In this position, the high beam and the tail light are
switched on.
F00719-10
Headlight flasher – Push the light switch into posi-
C
tion
The menu buttons are fitted in the middle of the left combination
switch.
The menu buttons are used to control the display on the combina-
tion instrument.
1
Button
is the UP button.
2
is the DOWN button.
Button
3
Button
is the SET button.
4
Button
is the BACK button.
F00721-10
Turn signal switch
Possible states
Turn signal off – Turn signal switch pushed toward the
switch housing.
Left turn signal, on – Turn signal switch pressed to
the left. The turn signal switch returns automatically
to the central position after use.
Right turn signal, on – Turn signal switch pressed to
F00721-11
the right. The turn signal switch returns automatically
to the central position after use.
1
Horn button
Possible states
•
The horn button
•
The horn button
position.
F00721-12
is fitted on the left side of the handlebar.
.
1
is fitted on the left side of the handlebar.
is fitted on the left side of the handlebar.
is in the basic position
is pressed – The horn is operated in this
CONTROLS 6
A
. In this
B
.
15