KTM 125 DUKE 2022 Owner's Manual page 75

–
Mount the damping rubber and rear sprocket carrier on the
rear wheel.
–
Insert the spacers.
–
Position the rear wheel.
The brake linings are correctly positioned.
–
Push the rear wheel forward as far as possible and lay the
chain on the rear sprocket.
–
Position the chain guard.
–
Pull the rear wheel back and mount wheel spindle
washer and chain adjuster
Guideline
Mount left and right chain adjusters
tion.
–
2
Mount nut
–
Push the rear wheel forward so that the chain adjusters are in
contact with the screws, and tighten nut
Guideline
In order for the rear wheel to be correctly aligned, the mark-
ings on the left and right chain adjusters must be in the
same position relative to reference markings
Nut, rear wheel spin-
dle
–
Position wheel speed sensor
–
Mount and tighten screw
F00745-12
Guideline
Screw, wheel speed
sensor holder
–
Mount and tighten screw
Guideline
Screw, chain guard
F00776-11
Finishing work
–
Remove the rear of the motorcycle from the lifting gear.
( p. 54)
–
Check the chain tension. (
4
.
4
in the same posi-
and the washer.
2
M14x1.5 98 Nm (72.3 lbf ft)
5
in the hole.
6
.
M6 8 Nm (5.9 lbf ft)
7
.
EJOT PT ® 7 Nm (5.2 lbf ft)
K60x30
p. 58)
WHEELS, TIRES 14
3
with the
.
B
.
73