KTM 125 DUKE 2022 Owner's Manual page 93

Warning
Danger of poisoning Coolant is toxic and a health hazard.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
F00765-10
F00763-10
F00766-11
Condition
The engine is cold.
Preparatory work
–
Remove the front spoiler. (
Main work
–
Position the motorcycle upright.
–
Place an appropriate container under the engine.
–
1
Remove screw with the seal ring.
–
2
Remove radiator cap .
–
Completely drain the coolant.
–
Mount and tighten screw
Guideline
Screw plug, water
pump drain hole
–
3
Loosen bleeder screw
Guideline
3 turns
–
Tilt the vehicle slightly to the right.
–
Pour in the coolant until it emerges without bubbles at the
bleeder screw, and then mount and tighten the bleeder screw
immediately.
Coolant ( p. 113)
–
Completely fill the radiator with coolant. Mount the radiator
cap.
–
Rest the vehicle on the side stand.
COOLING SYSTEM 16
p. 61)
1
with a new seal ring.
M6 10 Nm (7.4 lbf ft)
.
91