Installing the silencer
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque
Damage or loosening of screwed
connections
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Push the circlip onto the si-
lencer.
Push silencer 1 up to the stop.
Install screw 2 and shim 3.
Muffler on rear frame
14 lb/ft (19 Nm)
Tighten nut 3 of circlip 4.
Clamp on silencer and
exhaust manifold
18 lb/ft (24 Nm)
Install screw 2 of cover 1.
Air filter
Replace air filter insert
Remove rider's seat (
Remove screws 1.
9
177
86).
z