Table of Contents
Advertisement
9
172
Pull quick-release axle 1 out
while supporting the front
wheel.
Place front wheel down and
z
roll it forward out of the front
suspension.
Remove spacer bushing 1 from
the wheel hub.
Installing front wheel
WARNING
Use of a wheel which does
not comply with series speci-
fications
Malfunctions during control inter-
ventions by ABS and ASC/DTC
Please see the information on
the effect of wheel sizes on
the ABS and ASC/DTC chassis
control systems at the begin-
ning of this chapter.
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque
Damage or loosening of screwed
connections
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Mount spacing bushing 1 on
left side in wheel hub.
Advertisement
Table of Contents
