Rider And Passenger Seats - BMW R 1250 R 2019 Rider's Manual

Start the engine (
Press the button 1 repeatedly
until the desired heating level 2
is shown in front of the heated
grip symbol 3.
The handlebar grips can be
heated at two different levels.
50 % heating output
100 % heating output
The 2nd heating level is used
for fast heat-up of the grips;
then the switch should be
127).
switched back to the 1st level.
If no further changes are made
the selected heating level is
adopted as the setting.
To switch off the heated grips,
press the button 1 repeatedly
until the heated grip symbol 3
goes out.
Rider and passenger
seats
Remove passenger seat
Park motorcycle, ensuring that
support surface is firm and
level.
Press down passenger seat 1
in front area to support unlock-
ing while turning seat lock 2 to
left with ignition key and hold-
ing.
Raise passenger seat 2 at front
and release ignition key.
Take off passenger seat 2 and
place on a clean surface with
upholstered side facing down-
ward.
4
85
z