11.20
Removing the seat
11.21
Mounting the seat
11.22
Removing the air filter box cover
SERVICE WORK ON THE CHASSIS 11
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Remove screw
–
Raise the rear of the seat, pull the seat back, and lift it off.
K00964-10
–
Mount the front of the seat on the collar bushing of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure that the seat is correctly locked in.
K00987-01
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
K00964-10
–
Pull off the air filter box cover laterally in areas
off toward the front.
S03458-10
1
.
1
of the seat fixing.
M6
10 Nm (7.4 lbf ft)
p. 45)
A
and take it
57