11 SERVICE WORK ON THE CHASSIS
11.27
11.28
11.29
60
Removing the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
K00982-11
Installing the main silencer
K00982-10
Changing the glass fiber yarn filling of the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the rock wool dissipate and the silencer "burns out".
Not only is the noise level higher, the performance characteristics change.
Preparatory work
–
Remove the right side cover. (
Main work
–
1
Remove screw
.
–
Pull off the main silencer from the manifold at exhaust
2
sleeve
.
Main work
–
Mount the main silencer with exhaust sleeve
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
Finishing work
–
Install the right side cover. (
Preparatory work
–
Remove the right side cover. (
–
Remove main silencer. (
p. 61)
1
.
2
.
M6
10 Nm (7.4 lbf ft)
p. 62)
p. 61)
p. 60)