Husqvarna TC 85 2023 Owner's Manual page 75

SERVICE WORK ON THE CHASSIS 11
–
Move the clutch fluid reservoir mounted on the handlebar to a
horizontal position.
–
Remove screws
–
Remove cover
S04299-11
–
Fill bleeding syringe
Syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
–
On the clutch slave cylinder, remove bleeder screw
mount bleeding syringe
K00991-10
–
Inject the liquid into the system until it escapes from open-
A
ing of the master cylinder without bubbles.
–
Now and then, extract fluid from the master cylinder reservoir
to prevent overflow.
–
Remove the bleeding syringe. Mount and tighten screws
bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
K00990-10
rim
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
1
.
2 3
with membrane .
4
with the appropriate hydraulic fluid.
p. 124)
4
.
4 mm (0.16 in)
5
and
73