Removing The Fork Protector - Husqvarna TC 85 2023 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.7
48
S04301-10
S04302-10

Removing the fork protector

A00140-10
–
Clean and grease the wheel spindle.
Long-life grease ( p. 126)
–
Position the front wheel.
–
Insert the wheel spindle.
–
Mount and tighten screw
Guideline
Screw, front wheel
spindle
–
Position the brake caliper with the spacers.
–
6
Mount screws , but do not tighten yet.
Guideline
Screw, front M8
brake caliper
–
Position the brake line and the clamp. Mount and tighten
7
screws .
–
Operate the hand brake lever several times until the brake
linings are seated correctly against the brake disc. Secure the
hand brake lever in the activated position.
The brake caliper straightens.
–
6
Tighten screws .
Guideline
Screw, front M8
brake caliper
–
Remove the locking piece of the hand brake lever.
–
Remove the motorcycle from the lift stand. (
–
Operate the front brake and compress the fork a few times
firmly.
The fork legs straighten.
–
8
Tighten screws .
Guideline
Screw, fork stub
–
1
Remove screws and take off the clamp.
–
2
Remove screws on the left fork leg. Take off the fork pro-
tector.
–
3
Remove screws on the right fork leg. Take off the fork
protector.
5
.
M20x1.5 35 Nm (25.8 lbf ft)
25 Nm (18.4 lbf ft)
Loctite
25 Nm (18.4 lbf ft)
Loctite
p. 45)
M8 15 Nm (11.1 lbf ft)
®
243™
®
243™