Playing back a Tape
Connecting to a TV which has no Audio and Video input jack
You can connect your camcorder to a TV through a VCR.
Set the input selector on the VCR to LINE.
The yellow one : Video
The white one : Audio(L)
The red one: Audio(R) – STEREO only
To view the cassette on the television screen, select the channel reserved for
your VCR on the television.
(Refer to your VCR or television instruction book)
Playback
You can play the recorded tape in PLAYER mode.
1. Use the TV/VIDEO button to select VIDEO on your TV.
2. Connect a power source (battery or AC Power adapter) to the camcorder.
3. Set the POWER switch to PLAYER.
4. Insert the tape you want to see.
5. Using
(FF) and
(REW) buttons, find the first position that you want to see.
6. Press the
(PLAY/STILL) button.
The picture you recorded appears on the TV after a few seconds.
If the tape reaches its end during playback, the tape will rewind automatically.
Reference
It is best to decrease the volume of the built-in speaker when your camcorder is connected to the TV.
The playback mode (SP/LP) is selected automatically.
ENGLISH
VIDEO
AUDIO
PLAYER
PLAY/STILL
63