Maintenance; After Finishing A Recording - Samsung VP-D70 Owner's Instruction Book

Maintenance

After finishing a recording

At the end of a recording you must remove the power source.
When recording with a Lithium Ion battery Pack, leaving the pack on the camcorder can reduce the life span of the battery, Hence,
it should be removed from the camcorder.
After completing a recording session
1. Slide the EJECT switch in the direction of the arrow
Opening the cassette door ejects the tape automatically.
Please wait while the tape is completely ejected.
2. After removing the tape, close the door and store the camcorder in a dust free environment.
Dust and other foreign materials can cause square-shaped noise or hesitative image.
3. Set the power switch to OFF mode.
4. Disconnect the power source or remove the Lithium Ion Battery Pack.
When connecting a power supply, separate it in reverse order by referring to page 21.
Hold down the BATT. RELEASE button and slide the battery pack in the direction of the arrow.
ENGLISH
1
2
3
4
4
69