Table of Contents
Advertisement
Advanced Recording
Audio dubbing
The AUDIO DUBBING function only works in PLAYER Mode.
You can add sound to the original sound on a pre-recorded tape, recorded in the SP mode with 12bit sound.
Use the internal, an external microphone or other audio equipment.
The original sound will not be erased.
Record the sound again using MIC dubbing.
1. Set the camcorder to PLAYER mode.
If you want to use the external microphone, connect the microphone
to the external MIC input on the camcorder.
2. Press
(PLAY/STILL) button and find the start of the scene to be dubbed.
3. Press
(PLAY/STILL) button to pause the scene.
4. Press A.DUB button on the Remote Control.
A.DUB will be displayed in the LCD.
The camcorder is in a ready-to-dub state for dubbing.
5. Press the
(PLAY/STILL) button to start dubbing.
Press the
(STOP) button to stop the dubbing.
-
Reference
You can not dub sound on a pre-recorded tape recorded in
LP mode or 16 bit mode.
ENGLISH
START/
WIDE
PHOTO
DISPLAY
STOP
SELF
ZERO
TIMER
MEMORY
A.DUB
TELE
A.DUB
PLAY/
STILL
STILL
X2
SLOW
57
Hide quick links:
Advertisement
Table of Contents
