Using The Lithium Ion Battery Pack - Samsung VP-D70 Owner's Instruction Book

ENGLISH
Preparing

Using the Lithium Ion Battery Pack

To use the Lithium Ion Battery Pack
The amount of continuous recording time available depends on :
- The type and capacity of battery pack you are using.
- How much you use the Zoom function.
It is recommended that you have several batteries available.
Charging the Lithium Ion Battery Pack
1. Lift the viewfinder up and attach the battery pack to the camcorder.
2. Connect the AC Power Adapter to an AC cord and connect the AC cord to a wall socket.
3. Connect the DC cable to the DC jack socket on the camcorder.
4. Turn the camera power switch to off, the charging indicator will start to
flash showing that the battery is charging.
Blinking time
Once in a second
Twice in a second
Three times in a second
On for a second and
off for a second
5. When it has finished charging, disconnect the battery and AC Power Adapter from the camcorder.
- Even with the power switched off, the battery will still discharge is left connected to the camcorder.
Reference
The battery pack may be charged a little at the time of purchase.
To prevent reducing the life and capacity of the battery pack, always remove it from the camcorder after charging.
22
Charging rate
Less than 50%
50% ~ 75%
75% ~ 100%
Error - Reset the battery and
DC cable.
1
2
3
4