Playback
I ENGLISHI
÷ The Audio Dubbing function works only in Player Mode.
•=.Youcan not dub soundon a pre-recordedtape in LP or 16 bit mode.
+ You can add sound to the original sound on a pre-recorded tape recorded in SP mode with 12bit sound.
÷ Use the internal or an external microphone(not supplied) or other audio equipment.
+ The original sound will not be erased.
Dubbing Sound
1. Set the Power switch to PLAYER.
• If you want to use an external microphone, connect the microphone to
the external MIC input jack on the Camcorder.
2. Set the Mode switch to TAPE.
3. Press the I_III (PLAY/STILL)button and find the time frame of the scene to
be dubbed.
4. Press the 1,tll (PLAY/STILL)button to pause the scene.
5. Press the A.DUB button on the remote control.
• Audio Dubbing icon (_) will be displayed on the LCD screen.
• The Camcorder is ready for dubbing.
6. Press the I_/11 (PLAY/STILL)button to start dubbing.
• Press the • (STOP) button to stop the dubbing.
[ Notes ]
•
You can not use the Audio Dubbing function while playing a write protected video tape.
•
To utilize an external MID or sound source, connect a microphone to the MID jack or use the AV cable to connect
external sound source input.
•
To dub an external sound source, set the AV InlOut function to AV In (SO-D355 only). (see page 76).