2
Replaceable Parts
Ordering Information
To order a part, do the following:
1. Determine the part number.
2. Determine the quantity required.
3. Mail this information to the nearest Agilent Technologies office or, in the U.S., call the hot- line number listed in
the following section.
To order a part not listed in the replaceable parts lists, mail the following information to the nearest Agilent
Technologies office or, in the United States, call the hot- line number listed in the following section.
1. the instrument model number
2. the serial number and options, if any (see rear panel)
3. a description of the part
4. a description of the part's function
5. the quantity required
Order Parts Fast
When you have gathered the information required to place an order, go to the Agilent Technologies Technical Support
website:
http://www.agilent.com/find/techsupport
Save Money with Rebuilt-Exchange Assemblies
Under the rebuilt- exchange assembly program, certain factory- repaired and tested assemblies are available on a
trade- in basis. These assemblies cost less than a new assembly, and meet all factory specifications required of a new
assembly.
The defective assembly must be returned for credit under the terms of the rebuilt- exchange assembly program. The
figure below illustrates the assembly exchange procedure in flowchart format.
NOTE
When ordering replacement parts, ask about exchange assemblies.
2-1
Agilent E8663B Analog Signal Generator Service Guide