Installation Kit Parts List; Safety Considerations - Agilent Technologies ESG-D Series Installation Notes

Installation Kit Parts List

Item Quantity
Std UN9
No to
Opts UN7
1 1 1
2 1 1
3 1 1
4 1 1
5 1 1
6 2 2
7 3 3
8 1 1
9 1 0
10 1 0
Tools Required
• T-10 TORX screwdriver
• T-15 TORX screwdriver
• Long-nose pliers
• 9/16-in. socket

Safety Considerations

Before you disassemble the instrument, turn the power switch
WARNING
disconnect the line cord. Failure to unplug the signal generator can
result in personal injury.
Electrostatic discharge (ESD) can damage or destroy electronic components. All
CAUTION
work on electronic assemblies should be performed at a static-safe workstation.
4
UN9
to
UND
1 Board Assembly, Real-time I/Q Baseband Generator (A7)
1 Board Assembly, Generator/8 Meg (A8)
1 Option UN9 Label
1 Ribbon Cable Interconnect (W19)
1 Ribbon Cable (W18)
2 SMB Cable (W25/W26)
3 Coax Cable (W3/W4/W5) Longer cables, if needed
1 Installation Note
1 Ribbon Cable (W27), A7 to A8
0 Coax Cable (W24), A7 (Opt. UN8) to A5 (Opt. UND)
Description Part
Number
E4400-60070
E4400-60195
7120-1232
8120-8349
8120-8457
8120-8748
8120-5063
E4400-90663
8120-8725
E4400-20131
and
off