Replaceable Parts; Replaceable Parts List - Agilent Technologies N4000A Operating And Service Manual

NOTE
Table 1-5
Model/ Option Replacement
Bulkhead
Assembly
N4000A N4000-60014
N4000A Opt 001 N4000-60015
N4001A N4001-60003
N4001A Opt 001 N4001-60004
N4002A N4002-60004

Replaceable Parts

Table 1-5 and Table 1-6 lists all replaceable parts available for the
Agilent N400XA Smart Noise Sources. Figure 1-15 shows a typical
Smart Noise Source being prepared for parts replacement at the
assembly level by removing the four end screws (two at each end).
To order parts contact your local Agilent Technologies Sales and Service
Office.
If the Agilent Smart Noise Source is opened and parts replaced, it
requires re-calibration.

Replaceable Parts List

Replacement
Noise Cartridge
00346-60154
00346-60154
00346-60154
00346-60154
00346-60155
1. Only replace these parts if you have calibration facilities to verify the SNS.
Chapter 1
1
Attenuator
Replacement Kit
00346-60156
00346-60156
00346-60027
00346-60027
00346-60027
General Information
Replaceable Parts
PC Board
Assembly
N4000-60001
N4000-60001
N4000-60001
N4000-60001
N4002-60001
25