Chapter 4 - Replaceable Parts; Introduction; Exchange Assemblies; Ordering Information - Agilent Technologies 75000 Series C Service Manual

Introduction

Exchange
Assemblies
Ordering
Information
Replaceable
Parts List
Agilent E1445A Service Manual
This chapter contains information for ordering replaceable parts for the
Agilent E1445A AFG.
Table 4-1 lists assemblies that may be replaced on an exchange basis
(NEW/EXCHANGE ASSEMBLIES). Exchange assemblies are available
only on a trade-in basis. Defective assemblies must be returned for credit.
Assemblies required for spare parts stock must be ordered by the new
assembly part number.
To order a part listed in Table 4-1, specify the Agilent part number and the
quantity required. Send the order to your nearest Agilent Technologies
Sales and Support Office.
Table 4-1 lists the user-replaceable parts for the Agilent E1445A AFG. See
Figure 4-1 for locations of user-replaceable parts. Table 4-2 lists the
reference designators for the AFG. Table 4-3 is the code list of
manufacturers.
Chapter 4
Replaceable Parts
Replaceable Parts 117