Installation Kit Parts List; Tools Required - Agilent Technologies E4430B Installation Note

Installation Kit Parts List

Table 1 Option UN8 Upgrade Kit E4400-60160 Contents
Item
Quantity
Std U8
No to
* UN7
Opt's
1 1 1
2
1 1
3 1 0
4
1 1
5 1 1
6
1 1
7 2 0
8
3 0
9 1 0
10 1 1
11 1 0
12 1 0
* Implies no other digital hardware options are installed.

Tools Required

T-10 TORX screwdriver
T-15 TORX screwdriver
Long-nose pliers
9/16-in. Socket
WARNING Before you disassemble the signal generator, turn the power switch off,
and disconnect the line cord. Failure to unplug the instrument can result
in personal injury.
CAUTION Electrostatic discharge (ESD) can damage or destroy electronic components. All
work on electronic assemblies should be performed at a static-safe workstation.
4
U8
to
UND
1 Board Assembly, Real-Time I/Q Baseband Generator (A7)
1 Board Assembly, Generator/1 Meg (A8)
0 Firmware Upgrade Kit, Digital
1 UN8 Option Label
1 Ribbon Cable Interconnect (W19)
1 Ribbon Cable (W18)
0 SMB Cable (W25/W26)
0 Coax Cable (W3/W4/W5) Longer cables, if needed
0 Installation Note
1 Ribbon Cable (W27), A7 to A8
1 Coax Cable (W24), A7 (Option UN8) to A5 (Option UND)
0 ESG Digital Documentation Set
Description
Installation Note E4400-90167
Part Number
E4400-60070
E4400-60154
E4400-60230
7120-1232
8120-8349
8120-8457
8120-8748
8120-5063
E4400-90167
8120-8725
E4400-20131
E4400-90322