Post-Repair Procedures
Post-Repair Procedures Matrix
Table 4-2
Adjustments: Assemblies A18—A26
Adjustments
The following adjustments are listed in the order that
they should be performed for proper calibration.
ADC Calibration
ALC Dynamic Calibration
Power Flatness Calibration
Lowband Attenuator Calibration (<3.2GHz)
High Band Attenuator Calibration (>3.2GHz)
Table 4-3 Adjustments: Assemblies A28—A39, AT1, B1, and RF Output Connector
Adjustments
The following adjustments are listed in the order that they should
be performed for proper calibration.
ADC Calibration
YIG- Driver Pre- Tune Calibration
FM Path Offset Calibration
FM In- band Offset Calibration
FM Scale Offset Calibration
FM 1/2 Path Ratio Gain Calibration
Mod Source Relative Gain Calibration
FM/PM YO Frequency Compensation Calibration
DC FM Calibration
External Input Peak Detector Calibration
ALC Dynamic Calibration
Upconverter Gain Adjustment Calibration
Power Flatness Calibration
ALC Modulator Calibration
AM Gain Calibration
Pulse Width Calibration
Lowband Attenuator Calibration (<3.2GHz)
High Band Attenuator Calibration (>3.2GHz)
4-2
Replaced Assembly
✓
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
Replaced Assembly
✓ ✓ ✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Agilent E8663B Analog Signal Generator Service Guide