Troubleshooting On The St 700 Standard Transmitter; Overview; Critical Diagnostics Screens - Honeywell SmartLine ST 700 User Manual

8. Troubleshooting on the ST 700 Standard
8.1

Overview

Troubleshooting involves responding to error messages, primarily displayed by the MC Toolkit. Error
messages that may occur on the transmitter's local display are fairly self-explanatory and intuitive.
However, this section covers the diagnostic messages that indicate critical conditions. Other than the
critical conditions, additional detail is not provided. If you require assistance, contact your distributor
or Honeywell Technical Support. All other messages are covered by the MC Toolkit Users' Manual.
8.2

Critical Diagnostics Screens

The basic display will display the message CRITCAL FAULT on the top line of the LCD and the
appropriate diagnostic text on the lower line.
A description of the diagnostic conditions is given in Table 18 and Table 19 along with suggested
actions for resolving the problem.
Page 100
Transmitter
ST 700 SmartLine Pressure Transmitters User's Manual
Revision 13