Beko BT393S-IT User Manual page 68

product is connected. >>>Check it. The
product may not be connecting to the net-
work due to proximity.
If you see "F L t" on the screen, check the
steps below.
• The filters may be dirty. >>> Clean the in-
ner and outer filters or replace the eco-
friendly filter.
• In the door area, if you are using the inner
and outer dual filters. >>> Make sure that
both filters are installed.
• If you are using the eco-friendly filter fea-
ture, make sure that the filter cloth is at-
tached to the plastic part. >>>Insert the
filter cloth into the plastic part if it is not
inserted.
• Front side of the condenser may be dirty.
>>> Open and check the kick zone and
make sure it is clean.
• Check out the Maintenance and Cleaning
section.
If the problem persists after follow-
ing the instructions in this section,
contact your vendor or an Author-
ized Service. Never try to repair
your product yourself.
If you experience a problem with
any part of your device, you can re-
quest a replacement by consulting
the nearest authorised service with
the device model number.
EN / 68