Emptying The Water Tank; Cleaning The Condenser - Beko BT393S-IT User Manual

NOTE: Do not use metal tools to clean the
sensor's metal surfaces.
Due to fire and explosion hazard,
do not use solutions, cleaning ma-
terials or similar materials to clean
sensors.

10.3 Emptying the Water Tank

During drying, the moisture is removed
from the laundry and condensed, then the
water is accumulated in the water tank.
Empty the water tank after each drying ses-
sion.
Condensed water is not potable wa-
ter!
Do not ever remove the water tank
while the program is running!
If you forget to empty the water tank, during
the next drying sessions the machine will
stop operating when the water tank com-
pletely fills and a Water Tank warning icon
will blink. In this case empty the water tank
and to continue drying operation, press the
Start / Standby button.
To drain the water tank:
1. Pull the water tank out from its drawer
carefully.
2. Remove the water in the water tank.
3. If fiber is accumulated in the funnel on
the water tank, remove it under running
water.
4. Place back the water tank.
If direct discharge option is used,
water tank is not required to be
drained.

10.4 Cleaning the Condenser

The hair and the fiber that are not collected
by the fiber filter accumulates on the metal
surface of the condenser behind the air de-
flector. These fibers should be cleaned reg-
ularly.
EN / 63
IT
EN