Maintenance And Cleaning Safety; Lighting Safety - Beko BT393S-IT User Manual

immediately after the comple-
tion of drying (For models with
heating).
• Do not touch the inner surface
of the drum while adding or re-
moving clothes during a con-
tinuing programme. The drum
surface is hot.
• Do not press the buttons with
sharp objects such as forks,
knives, with your nails etc.
• Do not operate the faulty or
damaged product. Unplug the
product (or turn off the fuse to
which it is connected) and call
the manufacturer, an author-
ized service agent or a person
specified by the importer.
• Unplug the product when not
in use.
2.7 Maintenance and
Cleaning Safety
• Do not wash the product by
spraying or pouring water on it.
Do not use a pressure cleaner,
steam cleaner, hose or pres-
surised gun to clean the
product.
• Do not use sharp or abrasive
tools to clean the product.
• Do not use materials such as
household cleaning agents,
soaps, detergents, gas, gasol-
ine, thinner, alcohol, wax, etc.
to clean the product.
• The fiber filter should be fre-
quently cleaned. After each
drying cycle, clean the fiber fil-
ter and the inner surface of the
loading door.
• Clean the accumulated fiber
on the fins of the evaporator
behind the filter drawer with a
vacuum cleaner. You can clean
by hand, provided you wear
protective gloves. Do not try to
clean with bare hands. Evapor-
ator fins may damage your
hands (for products with heat
pump).
• Due to fire and explosion haz-
ard, do not use solutions,
cleaning materials, steel wool
or similar materials and tools
to clean sensors.
• Clean the flue (For models with
flue).
• Do not drink the condensed
water. Condensed water is not
potable water. This water can
harm human and animal health
if drunk.
2.8
• Contact an authorized service
when you need to replace the
LED/bulb used for lighting (for
products with lighting).
EN / 46

Lighting Safety