Beko BT393S-IT User Manual page 64

If the condenser cleaning icon is blinking,
check the metal surface. Clean the fiber, if
there is any. It must be checked at least
every 6 months.
1. Open the kickplate by pulling its handle.
2. Move the latches to open the air de-
flector lid.
3. Pull the brush to the left to remove it.
You can use the cleaning brush to clean
the fiber accumulated on filter, metal
surface of condenser and loading door.
The cleaning brush is inside the
manual bag. You can get your
brush from the manual bag and in-
sert it to its place on the air de-
flector to store it.
Clean the fiber on the metal surface of the
condenser with damp cloth or with the
brush on the air deflector in up - down dir-
ection. Do not clean in left - right direction
since it will damage the metal plates of the
condenser.
You can also use a vacuum cleaner with a
brush for cleaning. If the vacuum cleaner
does not have a brush, it is not recommen-
ded to be used for condenser cleaning
After cleaning the filter, door and the con-
denser, drag the brush to the right and lock
it in its place.
EN / 64