Beko BT393S-IT User Manual page 66

• Ventilation may be inadequate because
the area where the machine is installed is
too small. >>> Open the door or windows
to prevent the room temperature from
rising too much.
• If there is a humidity sensor, a lime layer
may have accumulated on the humidity
sensor. >>> Clean the humidity sensor.
• Excessive amount of laundry might be
loaded. >>> Do not load the drying ma-
chine excessively.
• Laundry might not have been spun ad-
equately. >>> Perform a higher speed
spinning on the washing machine.
Clothes come out damp after drying.
• A program not suitable for the laundry
type may have been used.>>> Check the
maintenance labels on the clothes and
select a program suitable for the clothes'
type or use extra time programs.
• Fiber filter (interior and exterior filters)
pores may be clogged. >>> Wash the fil-
ters with warm water and dry.
• Front side of the condenser may be
clogged. >>> Clean the front side of the
condenser.
• Excessive amount of laundry might be
loaded. >>> Do not load the drying ma-
chine excessively.
• Laundry might not have been spun ad-
equately. >>> Perform a higher speed
spinning on the washing machine.
Drying machine does not turn on or pro-
gram cannot be started. Drying machine
does not run after it is configured.
• Power plug might be unplugged. >>>
Make sure the power plug is plugged in.
• Loading door might be open. >>> Make
sure that the loading door is properly
closed.
• A program might not be set or Start /
Standby button might not be pressed.
>>> Make sure that the program is set
and it is not in Standby position.
• Child lock may be activated. >>> Turn off
the child lock.
Program terminated prematurely for no
reason.
• Loading door might not be closed prop-
erly. >>> Make sure that the loading door
is properly closed.
• There might be a power outage. >>>
Press the Start / Standby / Cancel button
to start the program.
• Water tank may be full. >>> Empty the
water tank.
Clothes have shrunk, hardened or spoiled.
• A program not suitable with the laundry
type might have been used. >>> Check
the maintenance labels on the clothes
and select a program suitable for the
clothes.
Water drips from the loading door.
• Fibers might have gathered on the inner
surfaces of the loading door and on the
surfaces of the loading door gasket. >>>
Clean the inner surfaces of the loading
door and the loading door gasket sur-
faces.
Loading door opens by itself.
• Loading door might not be closed prop-
erly. >>> Push the loading door until the
closing sound is heard.
Water tank warning symbol is on/flashing.
• Water tank may be full. >>> Empty the
water tank.
• Water discharge hose might have folded.
>>> If the product is connected directly to
the water discharge check the water dis-
charge hose.
The lighting inside the drying machine
does not turn on (in models with lamp).
• The drying machine might not have been
turned on by the On/Off button. >>>
Check that the drying machine is turned
on.
• Lamp might be malfunctioning. >>> Con-
tact Authorized Service to replace the
lamp
EN / 66