Beko BT393S-IT User Manual page 67

Anti-Crease icon or light is lit.
• Anti-Crease program that prevents the
laundry in the dryer from creasing may be
activated. >>> Turn the drier off and re-
move the laundry.
Fiber filter cleaning icon is lit
• Fiber filter (interior and exterior filters)
may be unclean. >>> Wash the filters with
warm water and dry.
• A layer may be formed in the fiber filter
pores that leads to clogging. >>> Wash
the filters with warm water and dry.
• A layer may be formed in the fiber filter
(inner and outer filters) pores that leads
to clogging. Wash the filters with warm
water and dry.
• Fiber filters may not be inserted. >>> In-
sert the interior and exterior filters to
their places.
• Environmentally-friendly filter cloth may
not be installed on the plastic part and
the front of the condenser may have
been clogged.>>>Install the environment-
ally-friendly filter to the plastic part and
place it in the filter housing.
• Environmentally-friendly filter may not
have been replaced although the warning
symbol is illuminated. >>> Replace your
filter.
An audible warning is heard from the ma-
chine.
• Fiber filters may not be inserted. >>> In-
sert the interior and exterior filters to
their places.
• Filters of the machine may not have been
installed.>>> Install the fiber filters (in-
ternal and external) or the environment-
ally-friendly filter to their housing.
Condenser warning icon is flashing.
• Condenser front side may be clogged
with fibers. >>> Clean the front side of
the condenser.
• Fiber filters may not be inserted. >>> In-
sert the interior and exterior filters to
their places.
The lighting inside the drying machine
turns on (in models with lamp).
• If the drying machine is plugged to the
power outlet, the On/Off button is
pressed and the door is open; the light
turns on. >>> Unplug the drying machine
or bring the On/Off button to Off position.
The steam symbol is flashing (In products
with steam function).
• There may not be enough water in the
machine for the program. >>> Run in a
program without cycle steam function.
Steam programs aren't starting. (In
products with steam function)
• There may not be enough water in the
machine for the program >>> Run in a
program without cycle steam function.
Wrinkle level does not decrease in the
wrinkle program (In products with steam
function)
• The amount of laundry maybe higher
than recommended. >>>Load desired
amount of laundry.
• The time of steam application may be
low. >>> Select longer time for steam ap-
plication.
• At the end of the program, laundry might
have been left in the machine for a long
time. >>>At the end of the program, im-
mediately remove the laundry and hang
them on a rope.
The odour in the laundry does not decrease
in the deodorization program (In products
with deodorization function).
• The amount of laundry maybe higher
than recommended. >>>Load desired
amount of laundry.
• The time of steam application may be
low. >>> Select longer time for steam ap-
plication
Wi-Fi icon flashes continuously (for mod-
els featuring HomeWhiz Function).
The product may not be connected to the
wireless network. >>>Connect to the net-
work following the instructions. There may
be a problem on the network where the
EN / 67
IT
EN