Shutdown - Graco ProMix II Service And Parts

Shutdown

1.
To stop production at any time, press Standby
on the Operator Station.
2.
WARNING
If using an electrostatic gun with a gun flush
box, shut off the electrostatics before placing the
gun in the box.
3.
If you have a gun flush box, place the gun inside
the box when the gun is not in use.
310653B
4.
If shutdown time WILL exceed the pot life, purge
the ProMix™ II of mixed material. See ProMix™ II
Operation manual.
If shutdown time WILL NOT exceed the pot life,
you do not need to purge the system, but you must
relieve system pressure.
WARNING
Follow Pressure Relief Procedure on page 8 when
you stop spraying, before changing spray tips, and
before cleaning, checking, or servicing equipment.
Read warnings, page 6.
Shutdown ◆
9