Graco ProMix II Service And Parts page 28

Connecting to a PC ◆ Updating Software
5. After the EasyKey™ Display software is updated,
the Smart Fluid Panel software automatically begins
updating. The status screen in F
on the EasyKey™ Display. Wait until automatic
update is complete.
F . 25
IG
Example of Software Version request
Welcome to the Graco Control Application Menu
Build date: Apr 1 2004 10:17:00.
a. Software Update and Version Information
b. Data Transfer
c. Utility
Enter Selection [a-c]: a
a. Install EasyKey Software
b. Install Control Software
c. Display Software Versions
d. Display Entire Flash Checksum
e. Return to Main Menu
Enter Selection [a-e]: c
EasyKey Boot: 1.01.000, checksum=d0cac6, built: Apr 1 2004 10:17:00
EasyKey: 1.01.000, checksum=19bb13d, built: Apr 1 2004 10:04:11
Fluid Plate Control: 1.01.000
a. Install EasyKey Software
b. Install Control Software
c. Display Software Versions
d. Display Entire Flash Checksum
e. Return to Main Menu
Enter Selection [a-e]: e
28
. 25 will appear
IG
download
status bar
"Programming Successful"
appears when download
completes
6. After the update is complete, the EasyKey™ Display
automatically reboots and the Graco screen briefly
appears. Verify the software versions on the screen
are correct.
F . 26
IG
7. To verify software versions, go to the Graco soft-
ware main menu and follow the screen instructions.
Refer to Example of Software Version request,
below.
Sequence
Main menu appears.
Option a selected.
Option c selected.
Software version information appears
for EasyKey™ and Smart Fluid Panel
Option e selected to return to main
menu.
software
versions
310653B