To Connect The Wlan Cartridge (Delivered As Accessory); Configuration; Overview: Configuration; To Access The Most Used Commands - Daikin ETBH16EF6V Installation Manual

7 Configuration

A
A
B
C
1
High voltage Smart Grid contact 1
2
High voltage Smart Grid contact 2
B C
4 Fix the cables with cable ties to the cable tie mountings. If
necessary, bundle excessive cable length with a cable tie.
6.3.12 To connect the WLAN cartridge (delivered
as accessory)
1 Insert the WLAN cartridge into the cartridge slot on the user
interface of the indoor unit.
3
Installation manual
20
7
7.1
X10M.1
L
1
X10M.2
This chapter describes what you have to do and know to configure
N
the system after it is installed.
X10M.3
L
2
X10M.4
N
Why
If you do NOT configure the system correctly, it might NOT work as
expected. The configuration influences the following:
▪ The calculations of the software
▪ What you can see on and do with the user interface
How
You can configure the system via the user interface.
▪ First time – Configuration wizard. When you turn ON the user
interface for the first time (via the unit), the configuration wizard
starts to help you configure the system.
X10M
▪ Restart the configuration wizard. If the system is already
configured, you can restart the configuration wizard. To restart the
1 2 3 4
configuration
Configuration wizard. To access Installer settings, see
"7.1.1 To access the most used
▪ Afterwards. If necessary, you can make changes to the
configuration in the menu structure or the overview settings.
Accessing settings – Legend for tables
You can access the installer settings using two different methods.
However, NOT all settings are accessible via both methods. If so,
the corresponding table columns in this chapter are set to N/A (not
applicable).
Accessing settings via the breadcrumb in the
home menu screen or the menu structure.
To enable breadcrumbs, press the
in the home screen.
Accessing settings via the code in the
overview field settings.
See also:
▪ "To access the installer
▪ "7.5 Menu structure: Overview installer
7.1.1
To change the user permission level
You can change the user permission level as follows:
Configuration
INFORMATION
Cooling is only applicable in case of:
▪ Reversible models
▪ Heating only models + conversion kit (EKHBCONV*)

Overview: Configuration

NOTICE
This chapter explains only the basic configuration. For
more detailed explanation and background information,
see the installer reference guide.
wizard, go to Installer
commands" [ 4 20].
INFORMATION
When the configuration wizard is finished, the user
interface will show an overview screen and request to
confirm. When confirmed, the system will restart and the
home screen will be displayed.
Method
button
settings" [ 4 21]

To access the most used commands

settings >
Column in tables
#
For example: [2.9]
Code
For example: [C-07]
settings" [ 4 29]
ETBH/X16EF6V+9W
Daikin Altherma 3 H HT W
4P644727-1 – 2021.02