Table of Contents
Advertisement
•
If a decide has multiple functions, e.g., a VCR/DVD
combo, the remote controller may not control both
device functions.
•
Do not use your phone as a remote controller in
pubic places where it can interface with others.
Setting up the phone as a remote controller
1. Align the IrDA port on the phone with a device.
2. Scroll to ROOM, LIVING, or ETC and press
<Set>.
You can designate the area in which the device the
phone will control is located.
3. Select the device type, TV or DVD.
4. Select a manufacturer of the device.
5. Scroll through the model numbers until you find
the appropriate one.
When you select the correct model number for
your device, the device turns on or off.
6. Press <Select>.
Using the remote controller function
1. Align the IrDA port on the phone with the device.
2. Scroll to ROOM, LIVING, or ETC.
You can turn on or off all of the devices you have
registered to be remotely controlled by the
phone at one time. Select the area you want to
control and press <Power all>.
3. Press the number key corresponding to the device
you are controlling.
4. Use the keys to control the device, referring to the
image on the display.
Deactivating the remote controller
1. Align the IrDA port on the phone with the device.
2. Scroll to ROOM, LIVING, or ETC and press
<Set>.
3. Scroll to the device type for which you want to
deactivate remote control and press <Menu>.
4. Select one of the following options:
•
Erase: deactivate control of the selected item.
69
Advertisement
Table of Contents
