Rogue-Ap Scan; Show Rogue-Ap - SMC Networks EliteConnect SMC2552W-G2 User Manual

rogue-ap scan

This command starts an immediate scan for access points on the radio interface.
Default Setting
Disabled
Command Mode
Interface Configuration (Wireless)
Command Usage
While the access point scans a channel for rogue APs, wireless clients will not
be able to connect to the access point. Therefore, avoid frequent scanning or
scans of a long duration unless there is a reason to believe that more
intensive scanning is required to find a rogue AP.
Example
Enterprise AP(if-wireless g)#rogue-ap scan
Enterprise AP(if-wireless g)#rogueApDetect Completed (Radio G) : 9 APs
detected
rogueAPDetect (Radio G): refreshing ap database now
Enterprise AP(if-wireless g)#

show rogue-ap

This command displays the current rogue AP database.
Command Mode
Exec
Example
Enterprise AP#show rogue-ap
802.11g Channel : Rogue AP Status
AP Address(BSSID)
======================================================================
00-04-e2-2a-37-23
00-04-e2-2a-37-3d
00-04-e2-2a-37-49
00-90-d1-08-9d-a7
00-30-f1-fb-31-f4
Enterprise AP#
SSID Channel(MHz) RSSI Type Privacy RSN
WLAN1AP 11(2462 MHz)
ANY 7(2442 MHz)
WLAN1AP 9(2452 MHz)
WLAN1AP 1(2412 MHz)
WLAN 6(2437 MHz)
Rogue AP Detection Commands
17 ESS
42 ESS
42 ESS
12 ESS
16 ESS
7
0 0
0 0
0 0
0 0
0 0
7-113