SMC Networks EliteConnect SMC2552W-G2 User Manual page 231

7
Command Line Interface
Command
beacon-interval
dtim-period
fragmentation- length
rts-threshold
super-a
super-g
description
ssid
closed system
max-association
assoc- timeout-interval
auth- timeout-value
shutdown
show interface wireless
show station
7-94
Table 7-17. Wireless Interface Commands
Function
Configures the rate at which beacon signals are
transmitted from the access point
Configures the rate at which stations in sleep mode
must wake up to receive broadcast/multicast
transmissions
Configures the minimum packet size that can be
fragmented
Sets the packet size threshold at which an RTS must
be sent to the receiving station prior to the sending
station starting communications
Enables Atheros proprietary Super A performance
enhancements
Enables Atheros proprietary Super G performance
enhancements
Adds a description to the wireless interface
Configures the service set identifier
Opens access to clients without a pre-configured
SSID
Configures the maximum number of clients that can
be associated with the access point at the same time
Configures the idle time interval (when no frames are
sent) after which a client is disassociated from the
VAP interface
Configures the time interval after which clients must
be re-authenticated
Disables the wireless interface
Shows the status for the wireless interface
Shows the wireless clients associated with the access
point
Mode Page
IC-W 7-102
IC-W 7-103
IC-W 7-103
IC-W 7-104
IC-W (a) 7-105
IC-W (b/g) 7-105
IC-W-VAP 7-105
IC-W-VAP 7-106
IC-W-VAP 7-106
IC-W-VAP 7-107
IC-W-VAP 7-107
IC-W-VAP 7-108
IC-W-VAP 7-108
Exec 7-109
Exec 7-110