CLI Commands for Displaying Station Status – To view status of clients currently
associated with the access point, use the show station command from the Exec
mode.
Enterprise AP#show station
Station Table Information
===========================================================
if-wireless G VAP [0]
802.11g Channel : Auto
No 802.11g Channel Stations.
if-wireless G VAP [1]
802.11g Channel : Auto
No 802.11g Channel Stations.
....
No 802.11g Channel Stations.
if-wireless g VAP [7]
802.11g Channel : Auto
No 802.11g Channel Stations.
if-wireless G VAP [0]
802.11g Channel : Auto
No 802.11g Channel Stations.
if-wireless G VAP [1]
802.11g Channel : Auto
No 802.11g Channel Stations.
....
No 802.11g Channel Stations.
if-wireless G VAP [7]
802.11g Channel : Auto
No 802.11g Channel Stations.
===========================================================
Enterprise AP#
:
:
:
:
:
:
6
Status Information
7-109
6-87