Advertisement
P/N 957-6285-00 (July 2023)
Installing Documentation and Software
The Monitor/Sentinel system documentation and software are downloaded.
1. Follow the instruction sheet on downloading TRDI software and manuals.
2. Software is available on https://tm-portal.force.com/TMsoftwareportal.
•
Install TRDI Toolz, PlanADCP and WinADCP for WH systems.
•
The Workhorse II requires TRDI Toolz, Workhorse II Plan, ISM Compass
Calibration, Compass Post Calibration, and WinADCP software.
•
Download application software VmDas or WinRiver II as needed.
3. Use our online customer portal at
to download manuals or other Teledyne RDI documentation. Download the Workhorse Operation
Manual Guide and the Commands and Output Data Format guide. PDF versions of all Workhorse
documentation are available for download.
Workhorse Operation Manual Guide
Installing the USB to Serial Adapter Driver
If there is an available internet connection, Windows 10/11 will install the USB driver on first
connection. If necessary, install the Virtual COM port (VCP) driver to make the USB adapter
appear as an additional COM port. The free FTDI driver download page is available here:
https://ftdichip.com/drivers/
Use Windows Device Manager® to determine the USB to Serial adapter COM port number.
Remove the adapter, wait a moment, note the list of ports, reinsert the adapter and note the
new port.
Page 4
EAR99 Technology Subject to Restrictions Contained on the Cover Page.
https://www.teledynemarine.com/support/RDI/technical-manuals
Workhorse Commands and Output Data Format guide
WorkHorse Monitor/Sentinel Deployment Guide
Advertisement
