Advertisement
P/N 957-6285-00 (July 2023)
Preparing the ADCP
P
R E P A R I N G T H E
Checking you have all the Monitor/Sentinel parts
Installing the documentation and software
Installing the batteries
Checking the system is closed properly
Identifying what's in the Box
Included with the Monitor/Sentinel system:
Part Number
Name
WHS1200, 600, 300
Sentinel system
WHM1200, 600, 300
Monitor system
WHSII1200, 600, 300
WH2 Sentinel
WHMII1200, 600, 300
WH2 Monitor
Included with the WorkHorse Accessories Kit:
Part Number
Name
977-7005-00
Shipping case Sentinel
977-7003-00
Shipping case Monitor
717-3030-xxx
I/O cable
97Z-6190-00
USB to Serial Adapter
717-3014-00
AC Power Adapter
737-3010-00
RS-422 to RS-232
Converter
757K6023-00
Alkaline Battery Pack
(Sentinel only)
977-6013-00
Memory (Sentinel only)
95Z-6007-00
Download instructions
957-6283-00
(part of
Getting Started
757K6081-xx)
Download from
TRDI Toolz
website
PlanADCP
WinADCP
Workhorse II Plan
ISM Compass Calibration
Compass Post Calibration
WinADCP
757K6037-00
Spare parts and tools
Page 2
EAR99 Technology Subject to Restrictions Contained on the Cover Page.
A D C P
I N C L U D E S T H E F O L L O W I N G S T E P S
Description
The Workhorse Monitor/Sentinel system includes the transducer, Memory card (Sentinel
only), dummy plug, and protective cap. When unpacking, use care to prevent physical
damage to the transducer face and connector. Use a soft pad to protect the transducer.
Description
Shipping case with custom foam cutouts.
The I/O cable is used for serial communications.
The USB adapter appears as an additional serial COM port.
The optional AC Adapter runs on any standard AC power and supplies +48 VDC.
Converts RS-422 to RS-232 for serial communications. (Optional for Monitor systems)
WorkHorse Sentinel batteries are shipped inside the WorkHorse ADCP but
Connect the battery and seal the WorkHorse ADCP before deployment.
The WorkHorse Sentinel ADCP includes one memory card installed inside the system. Two
PCMCIA memory card slots are available.
Workhorse II Sentinel ADCPs come standard with one CompactFlash memory card
maximum memory capacity not to exceed 4GB.
This sheet has instructions for downloading the software and manuals.
A printed sheet showing Monitor/Sentinel set up.
Utility and testing software package that can be used to test both WH and WHII ADCPs.
Software for Workhorse systems
Software for Workhorse II systems
Contains tools, O-Rings, and close-up hardware. See the WorkHorse Operation Manual,
Maintenance chapter for a list of included parts.
WorkHorse Monitor/Sentinel Deployment Guide
:
not
connected.
with
the
Advertisement
