Connecting External Equipment; Connecting A Computer; Usb Computer Port; Installing The Dedicated Driver - Roland JUPITER-X Owner's Manual

Connecting External Equipment

Connecting a Computer

MIDI messages can be exchanged with a computer via the JUPITER-X's

USB COMPUTER Port.

MEMO
5 For details on operating requirements and supported operating systems,
refer to the Roland website.

Installing the Dedicated Driver

In order to use the JUPITER-X, you'll need to download the driver from
the following URL and install it on your computer.
For details on installation, refer to the Roland website.
&
https://www.roland.com/support/
USB driver settings
Here's how to specify the USB driver that's used when connecting the
JUPITER-X to your computer via the USB COMPUTER port.
1.
Press the [MENU] button.
The setting screen appears.
2.
Use the [1] knob to select
[ENTER] button.
You can also make this selection by using the
instead of the [1] knob.
3.
Use the [1] knob to select
4.
Use the [2] knob to specify
Parameter Value
Explanation
[1] knob [2] knob
Choose this when using the USB driver that you
VENDOR
downloaded from the Roland website.
USB Driver
Choose this when using the USB driver that was
provided with your computer.
GENERIC
* Only MIDI can be used.
5.
Save the setting.
&
"Saving the System Settings (System Write)"
6.
Turn the JUPITER-X's power off and on again.
(USB COMPUTER Port)
USB cable
"SYSTEM," and then press the
PAGE [ ] [ ] buttons
"USB Driver."
"VENDOR."
(p. 23)

Port Names When Using the VENDOR Driver

Audio input device
Device Name Port Name
IN MIX (mixed output of the JUPITER-X)
IN 1 (output of the JUPITER-X's part 1)
IN 2 (output of the JUPITER-X's part 2)
IN 3 (output of the JUPITER-X's part 3)
JUPITER-X
IN 4 (output of the JUPITER-X's part 4)
IN 5 (output of the JUPITER-X's part 5)
IN MIC (output of the signal that is input from the JUPITER-X's MIC
IN jack)
Audio output device
Device Name Port Name
OUT (USB audio input to the JUPITER-X)
JUPITER-X
OUT MIC (treated as mic input to the JUPITER-X)
MIDI input/output device
JUPITER-X
MIDI IN
JUPITER-X DAW CTRL
JUPITER-X
MIDI OUT
JUPITER-X DAW CTRL
* DAW CTRL is not used for normal MIDI communication.
21