Rhodes Multi - Roland SC-8820 Owner's Manual

Effects
EQ (Equalizer)
EQ L Gain (EQ Low Gain)
Adjusts the low-range gain of the equalizer.
EQ M Fq (EQ Mid Frequency)
Sets the center frequency for the equalizer mid-range.
EQ M Q (EQ Mid Q)
Adjusts the width of the area centered at the EQ M Fq
setting in which the gain will be affected. The area affected
will become narrower as this value is increased.
EQ M Gain (EQ Mid Gain)
Adjusts the gain of the area specified by the EQ M Fq
parameter and the EQ M Q parameter.
EQ H Gain (EQ High Gain)
Adjusts the high-range gain of the equalizer.
CF (Chorus/Flanger)
CF Sel (CF Select)
Selects either Chorus or Flanger.
CF Rate
Adjusts the speed of modulation for the chorus or flanger.
CF Depth
Adjusts the depth of modulation for the chorus or flanger.
CF Fb (CF Feedback Level)
Adjusts the amount (%) of the flanger sound that will be
returned to the input. Negative (-) values will invert the
phase.
* In the case of Chorus, this will have no effect.
#CF Mix
Adjusts the volume of the chorus or flanger sound.
Level (Output Level)
Adjusts the output level.

54: Rhodes Multi

Rhodes Multi provides Enhancer (EH), Phaser (PH), Chorus
or Flanger (CF), and Tremolo or Pan (TP) effects connected in
series.
fig.9-57
L
EH
PH
R
EH
EH (Enhancer)
EH Sens (Enhancer Sensitivity)
Adjusts the sensitivity of the enhancer.
EH Mix (Enhancer Mix Level)
Adjusts the level at which the overtones generated by the
enhancer will be mixed with the direct sound.
76
-12–+12 [10 (40 03 0C)]
200–6.3k [11 (40 03 0D)]
0.5/1.0/2.0/4.0/9.0 [12 (40 03 0E)]
-12–+12 [13 (40 03 0F)]
-12–+12 [14 (40 03 10)]
Chorus/Flangr [15 (40 03 11)]
0.05–6.40 [16 (40 03 12)]
0–127 [17 (40 03 13)]
-98%–+98% [18 (40 03 14)]
0–127 [19 (40 03 15)]
0–127 [20 (40 03 16)]
[04H, 06H]
TP
CF
TP
0–127 [1 (40 03 03)]
0–127 [2 (40 03 04)]
PH (Phaser)
PH Man (Phaser Manual)
Adjusts the center frequency at which the sound will be
modulated.
PH Rate (Phaser Rate)
Adjusts the modulation speed.
PH Depth (Phaser Depth)
Adjusts the modulation depth.
PH Reso (Phaser Resonance)
Adjusts the emphasis for the region around the center
frequency specified by the PH Man parameter.
PH Mix (Phaser Mix)
Adjusts the proportion of the phase-shifted sound that will
be mixed with the direct sound.
CF (Chorus/Flanger)
CF Sel (CF Select)
Selects either Chorus or Flanger.
CF LPF (CF Low Pass Filter)
Cuts the high frequency range of the chorus or flanger
sound.
CF Dly (CF Pre Delay)
Adjusts the time from the direct sound until when the
chorus or flanger sound is heard.
CF Rate
Adjusts the modulation speed.
CF Depth
Adjusts the modulation depth.
CF Fb (CF Feedback Level) -98%–+98% [13 (40 03 0F)]
Adjusts the amount (%) of the flanger sound that will be
returned to the input. Negative (-) values will invert the
phase.
* In the case of Chorus, this will have no effect.
CF Mix
Adjusts the volume of the chorus or flanger sound.
TP (Tremolo/Pan)
TP Sel (TP Select)
Selects either Tremolo or Pan.
TP Mod WV (TP Modulation Wave)
Tri/Sqr/Sin/Saw1/Saw2 [16 (40 03 12)]
Selects the way in which tremolo or pan will be modulated.
Tri: The sound will be modulated like a triangle
wave.
Sqr: The sound will be modulated like a square
wave.
Sin: The sound will be modulated like a sine
wave.
Saw1,2: The sound will be modulated like a
sawtooth wave.
100–8.0k [3 (40 03 05)]
0.05–6.40 [4 (40 03 06)]
0–127 [5 (40 03 07)]
0–127 [6 (40 03 08)]
0–127 [7 (40 03 09)]
Chorus/Flangr [8 (40 03 0A)]
250–6.3k/Bypass [9 (40 03 0B)]
0–100ms [10 (40 03 0C)]
0.05–6.40 [11 (40 03 0D)]
0–127 [12 (40 03 0E)]
0–127 [14 (40 03 10)]
Trem/Pan [15 (40 03 11)]