Roland SC-8820 Owner's Manual page 177

Address(H) Size(H)
40 1x 0B 00 00 01
40 1x 0C 00 00 01
40 1x 0D 00 00 01
40 1x 0E 00 00 01
40 1x 0F 00 00 01
40 1x 10 00 00 01
40 1x 11 00 00 01
40 1x 12 00 00 01
40 1x 13 00 00 01
40 1x 14 00 00 01
Single : If the same note is played multiple times in succession, the previously-sounding note will be completely silenced, and then the new note will be sounded.
LimitedMulti : If the same note is played multiple times in succession, the previously-sounding note will be continued to a certain extent even after the new note is sounded. (Default setting)
FullMulti : If the same note is played multiple times in succession, the previously-sounding note(s) will continue sounding for their natural length even after the new note is sounded.
* ASSIGN MODE is the parameter that determines how voice assignment will be handled when sounds overlap on identical note numbers in the same channel (i.e., repeatedly struck notes).
This is initialized to a mode suitable for each Part, so for general purposes there is no need to change this.
40 1x 15 00 00 01
* This parameter sets the Drum Map of the Part used as the Drum Part. The SC-8820 can simultaneously (in different Parts) use up to two Drum Maps (MAP1, MAP2). With the initial settings,
Part10 (MIDI CH=10, x=0) is set to MAP1 (1), and other Parts are set to normal instrumental Parts (OFF(0)).
Address(H) Size(H)
40 1x 16 00 00 01
40 1x 17 00 00 02
40 1x 18#
* PITCH OFFSET FINE allows you to alter, by a specified frequency amount, the pitch at which notes will sound. This parameter differs from the conventional Fine Tuning (RPN #1) parameter
in that the amount of frequency alteration (in Hertz) will be identical no matter which note is played. When a multiple number of Parts, each of which has been given a different setting for
PITCH OFFSET FINE, are sounded by means of an identical note number, you can obtain a Celeste effect.
40 1x 19 00 00 01
40 1x 1A 00 00 01
40 1x 1B 00 00 01
40 1x 1C 00 00 01
40 1x 1D 00 00 01
40 1x 1E 00 00 01
40 1x 1F 00 00 01
40 1x 20 00 00 01
40 1x 21 00 00 01
40 1x 22 00 00 01
40 1x 23 00 00 01
* When "GM1 System On" is received, Rx.BANK SELECT will be set OFF.
* When "GS RESET" is received, Rx.BANK SELECT will be set ON.
40 1x 24 00 00 01
* When RX BANK SELECT LSB = OFF, Bank Select LSB (Bn 20 11) will be treated as 00H regardless of its value.
40 1x 2A 00 00 02
40 1x 2B#
40 1x 2C 00 00 01
40 1x 30 00 00 01
40 1x 31 00 00 01
40 1x 32 00 00 01
Data(H) Parameter
00 – 01 Rx. MODULATION
00 – 01 Rx. VOLUME
00 – 01 Rx. PANPOT
00 – 01 Rx. EXPRESSION
00 – 01 Rx. HOLD1
00 – 01 Rx. PORTAMENTO
00 – 01 Rx. SOSTENUTO
00 – 01 Rx. SOFT
00 – 01 MONO/POLY MODE
00 – 02 ASSIGN MODE
00 – 02 USE FOR RHYTHM PART
Data(H) Parameter
28 – 58 PITCH KEY SHIFT
08 – F8 PITCH OFFSET FINE
00 – 7F PART LEVEL
00 – 7F VELOCITY SENSE DEPTH
00 – 7F VELOCITY SENSE OFFSET
00 – 7F PART PANPOT
00 – 7F KEYBOARD RANGE LOW
00 – 7F KEYBOARD RANGE HIGH
00 – 5F CC1 CONTROLLER NUMBER
00 – 5F CC2 CONTROLLER NUMBER
00 – 7F CHORUS SEND LEVEL
00 – 7F REVERB SEND LEVEL
00 – 01 Rx.BANK SELECT
00 – 01 RX BANK SELECT LSB
00 00 – 40 00 – 7F 7F PITCH FINE TUNE
00 – 7F DELAY SEND LEVEL
00 – 7F TONE MODIFY1
Vibrato Rate
00 – 7F TONE MODIFY2
Vibrato Depth
00 – 7F TONE MODIFY3
TVF Cutoff Freq
Description Default Value (H)
OFF/ON 01
OFF/ON 01
OFF/ON 01
OFF/ON 01
OFF/ON 01
OFF/ON 01
OFF/ON 01
OFF/ON 01
Mono/Poly 01
(=CC# 126 01/CC# 127 00)
0 = SINGLE SC-8820/SC-88Pro/SC-88 MAP
1 = LIMITED-MULTI 01
2 = FULL-MULTI SC-55 MAP
00 at x=0
01 at x 0
0 = OFF
1 = MAP1
2 = MAP2
Description
-24 – +24 [semitones]
-12.0 – +12.0 [Hz]
Use nibblized data.
0 – 127
(=CC# 7)
0 – 127
0 – 127
-64 (RANDOM),
-63 (LEFT) – +63 (RIGHT)
(=CC# 10, except RANDOM)
(C-1) – (G9)
(C-1) – (G9)
0 – 95
0 – 95
0 – 127
(=CC# 93)
0 – 127
(=CC# 91)
OFF/ON
OFF/ON
-100 – 0 – +100 [cents]
(= RPN#1)
0-127
(=CC# 94)
-64 – +63
(=NRPN# 8/CC#76)
-64 – +63
(=NRPN# 9/CC#77)
-64 – +63
(=NRPN# 32/CC#74)
Appendices
Description
ON
ON
ON
ON
ON
ON
ON
ON
Poly
LIMITED-MULTI
SINGLE (Drum Part)
LIMITED-MULTI (Normal Part)
00 at 0 OFF (Normal Part)
01 at x=0 MAP1 (Drum Part)
Default Value (H) Description
40 0 [semitones]
08 00 0 [Hz]
64 100
40 64
40 64
40 0 (CENTER)
00 C-1
7F G 9
10 16
11 17
00 0
28 40
01(00*) ON(OFF*)
01 ON
40 00 0
00 0
40 0
40 0
40 0
177