Roland SC-8820 Owner's Manual page 91

fig.flow*
Check the following points.
• Are the output jacks of the SC-8820 correctly
connected to the input jacks of your audio device?
• If you are using a computer cable for connections,
is that serial port (COM port) being used by another device?
(Windows 95/98)
* For details on the serial port settings, refer to the owner's manual of
your computer.
• Refer to the owner's manual of the included CD-ROM,
and make the appropriate driver settings.
You hear sound!
Connect the headphones to the
headphone jack of the SC-8820.
Can you hear sound through
NO
If the driver is not installed, the SC-8820 will not sound.
Refer to the owner's manual of the included CD-ROM,
and install the USB driver or serial MIDI driver.
headphones?
Check the following points.
If you can hear sound through headphones,
the problem may be that the audio cable transmitting
the sound to the other devices is broken or incorrectly
connected, or that there is a problem with your mixer/amp/
speaker system. Replace the cable and the connected
devices.
Contact "Roland Service Center." (back cover)
Contact "Roland Service Center."
(back cover)
Appendices
YES
You hear sound!
91